How to enable LDAP on domain controller.

Enabling LDAP for Domain Controller.

Firewall rules for LDAP

1. In the Start menu, search for "firewall" and click Windows Firewall with Advanced Security
2. Once the application opens, select Inbound Rules, and then under Actions click New Rule...
3. Select Port, and then click Next
4. Select TCP and Specific local ports:. Enter 389,636 as the ports, and then click Next
5. Ensure that Domain, Private and Public are checked, and click Next
6. Create a name and description for the new firewall rule that was created, once complete click Finish
7. Repeat to step 2-6, but instead of selecting "Inbound Rules" select Outbound Rules

Port forwarding for LDAP

1. Open Router settings
2. Set up Port Forwarding rule to route traffic on ports 389 and 636 to the Domain Controller computer’s IP address
3. Reset router if required

More information about LDAP ports can be found here:

https://support.microsoft.com/en-us/help/179442/how-to-configure-a-firewall-for-domains-and-trusts

For any additional questions or concerns regarding proximity settings, computer locking, credential management, or compliance, please contact GateKeeper Enterprise support using the Support Ticket form on https://gkaccess.com/support/ or email [e-mail].

---------------------------------------

LDAP integration; domain controllers; enabling LDAP; enable ldap; turn on LDAP; AD LDAP; Active Directory LDAP; windows LDAP; Windows AD ldap;