How to use GateKeeper Deploy - explained.
GateKeeper™ Deploy is an MSI application deployment utility for mass-installing GateKeeper Client end user software to Windows computers on a network.
GateKeeper Deploy is a utility for seamlessly distributing software to computers on a network. It is used to deploy the GateKeeper Client application to Windows machines on your network.
- File and Printer Sharing must be enabled on all computers
- Network Discovery must be enabled on all computers
- The MSI file of the software to be deployed must be saved in a shared drive that is accessible from all the computers
- System Level or credentials that have administrative rights on all the computers
The GateKeeper Deploy tool uses Microsoft’s PSExec utility to manage software deployment on a network. Other functions include ability to search Active Directory for computers on the network, ping any computer, and to shut down or restart one.
Enabling Network Discovery and File and Printer Sharing:
- Go to Control Panel --> Network and Internet
- Open Network and Sharing Center
- Navigate to Change advanced sharing settings
- Turn on Network Discovery and File and Printer Sharing (usually Domain)
Using the GateKeeper Deploy Utility:
Install the GateKeeper Deploy utility on the computer you will deploy software from. After installation, launch the application.
Click the Computers button to load the Computers menu. From this menu, search for computers on the domain and then select the ones you want to deploy the GateKeeper software to and then click Use List to go back to the main screen.
Check the box next to the computers you want to deploy software to and then ping them to make sure they are available.
The ping command will return an “OK” or “FAIL” result for the computers you have selected.
Next, click the Browse button to select the MSI file. In this example, we are selecting the GateKeeper-Client-Win.msi file from a shared folder on the network. This file must be in a shared drive that is accessible by all the computers on the network.
Once you choose the MSI file, you can select the various options for the installation. The most recommended option is: Quiet Installation for All Users.
You can also add command line arguments here. For example, for the GateKeeper Client application, you can sync the address of the GateKeeper Hub server by typing in “https://<IPAddressOfHub>:<PortNumberOfHub>”. Additional arguments can be added here as well. For example, the Client API Key can be added as "API_KEY=abcdefgh"
When you have finished selecting the appropriate options, click Done.
Next, select the appropriate credentials for deployment. You can either select the System Account or you can type in your admin credentials and select the Use Credentials option.
*[Important] In order to use the System Account for deployment, make sure you selected the option for All Users in the previous menu.
Finally, click Deploy to start the deployment process. This will open the deployment status screen where you can monitor installation progress.
You can see the computers where the PSExec process is initialized and the status of the progress. Clicking on the Deployment Log, Raw, and MSI Logging tabs shows the information on the different stages of the deployment process. Upon successful deployment to all selected computers, the loading bar will reach 100% status in green and the log file will be shown.
Close this screen and return to the main screen - now you can also see the log of the PSExec commands for each of the computers.
If you're unable to complete the installation using the GateKeeper Deploy utility, please retry deployment with the system credentials or with the domain admin credentials.
Follow the steps below to resolve this issue:
1. Instead of using your own admin credentials, select the Use System option under Credentials.
There are two options to run PSEXEC on a remote computer - using SYSTEM credentials or the user's credentials. The GateKeeper Deployment utility will use the system credential and reattempt to install the software.
2. Click the Use System credential checkbox.
3. Click the Start Deploy button.
4. Done! If you're still unable to complete the installation, please email GateKeeper Support at firstname.lastname@example.org for further assistance.
For any additional questions or concerns regarding deploying GateKeeper™, proximity settings, computer locking, credential management, or compliance, please contact GateKeeper Enterprise support using the Support Ticket form on https://gkaccess.com/support/ or email email@example.com.
How to use GateKeeper Deploy; What is GateKeeper Deploy; GateKeeper Deploy for companies; Using GateKeeper Deploy; Deploying GateKeeper to users; Deploying GateKeeper to employees; deploying GateKeeper to people; Deploying GateKeeper to computers; Deploying GateKeeper to PCs; Deploy GateKeeper to network; Deploying proximity authentication to computers; Mass deploy proximity software; Deploy proximity software to company; Deploying proximity software to computers; GateKeeper Deploy explained; gatekeeper authentication software rollout; roll out authentication mfa to endpoint PCs; mfa on premise; mfa on prem software; 2fa on-premise; digital transformation; technology overhaul; tech modernization; deploying GateKeeper to PCs; how to deploy GateKeeper to computers; deploying GateKeeper software to network PCs; best way to install GateKeeper software; deploying gatekeeper at multiple locations; updating gatekeeper with multiple PCs; multiple computer update; multiple PC update; company-wide software update; how to update all at once?; How to use GateKeeper Deploy tool - explained.; How mass-install GateKeeper Deploy - explained.; Mass-Install GateKeeper Proximity Software with GateKeeper Deploy; Mass-Install GateKeeper Client Software with GateKeeper Deploy;