Change Computer Lock and Unlock Range.
GateKeeper locks or unlocks the computer based on the signal strength and motion data sent by the tokens (Halberd or Trident app). To adjust range settings for locking and unlocking your PC, move the blue triangle markers on the GateKeeper Client Dashboard.
After installing the GateKeeper Client software, the default settings will be automatically applied.
The default unlock zone will be 70%, which is the unlock zone with the largest distance from the computer. If you increase this number, the closer you will need to bring your key to the computer in order to unlock it.
The default lock zone will be 25% and when the signal strength drops below 25% consistently, the GateKeeper will lock the PC. If you decrease the lock value, you will need to walk further away to lock the computer.
The minimum value for the lock zone is set to 0% while the unlock zone is set to 50%.
The maximum value for the lock zone is set to 70% while the unlock zone is set to 90%.
Please change the lock and unlock levels according to your needs and environment. Remember to carry the GateKeeper token outside of your pockets, and attach the USB receiver to the front of the computer or taped to the monitor for optimal performance. It is also recommended to use more than 1 USB sensor to maximize performance.
Additionally, if you go to the Settings tab on the left, you have more options to adjust the locking response time.
Under Lock Settings, you have Motion Detection Sensitivity option. Choose a level of sensitivity to motion to force the computer to lock faster. High motion sensitivity will allow the computer to lock quicker. If the system is locking too much while you are sitting at your desk, reduce the motion sensitivity to the Low level.
There is also the Lock Delay Timeout feature. This function will delay locking the computer after a lock decision has been made for this Lock Delay Timeout period. Choose a value for this delay if you want to prevent the computer from locking immediately when you walk away. Important: This lock delay will only apply when the computer is locked due to proximity.
For any additional questions or concerns regarding proximity settings, computer locking, credential management, or compliance, please contact GateKeeper Enterprise support using the Support Ticket form on https://gkaccess.com/support/ or email email@example.com.
"Adjust range"; "Change GateKeeper range"; "Change distance to lock/unlock"; adjusting range; range adjustment; GateKeeper adjustment; changing range levels; level range edit; edit range; shorten range; lengthen range; longer range; shorter range; token range; lock range; unlock range; locking range; unlocking range; new lock level;